Close

Steyr Mannlicher Model M

The History of Steyr

The story of Steyr Mannlicher began in 1821 when Leopold Werndl, a blacksmith, started manufacturing iron parts for firearms in the city of Steyr. His son Josef Werndl took over his business and founded the 'Josef und Franz Werndl & Comp. Waffenfabrik und Sägemühle in Oberletten ' in 1864. In the following years, he played a crucial role in the development of several rifles, including the straight pull-rifles M. 85 and M. 86. At the beginning of the 20th century, the engineers Ferdinand Mannlicher and Otto Schönauer developed the Original Mannlicher Schönauer, a legendary hunting rifle, the production of which took place until 1973. The company grew over the years and reached a production capability of 4.000 firearms per day before World War I. After the War, Steyr was prohibited from firearm manufacturing after the Treaty of Saint-Germain-en-Laye was signed. To avoid going bankrupt, they used their knowledge and machinery to manufacture cars, bicycles, motorcycles, tractors, trucks, dynamos, electric motors, and other things (they were not allowed to resume firearm production until 1930). In 1926, the company’s name was changed to Steyr-Werke AG. It merged with Austro-Daimler-Puchwerke AG in 1934 to form Steyr-Daimler-Puch AG. Both Austro-Daimler (previously a subsidiary of Daimler-Motoren-Gesellschaft) and Puch (founded by the Slovenian inventor and mechanic Janez Puh) were active in the automobile industry, with Puch also manufacturing bicycles, motorcycles, and mopeds.

They even employed Ferdinand Porsche for a time – he made several contributions to the company – one of them was designing an air-cooled 3.5 L V8 engine for the Steyr RSO Raupenschlepper Ost tracked vehicle. Steyr is known for modifying Fiat cars and adding their engines to some of the models (Steyr-Fiat 1100 Mod E and Fiat 1400, for example). In 1972, they cooperated with Mercedes in the design of Puch G, also known as Mercedes Benz G-class.

During World War II, the company focused on firearm, vehicle, aviation engine, and ball-bearing production for the German military. After a short firearm manufacturing ban after the end of the War, Steyr resumed the production of arms in 1950. In the years that followed, they presented many innovative firearms such as StG 77 (also known as Steyr AUG), an assault rifle with a bullpup design; SSG 69, which was ahead of its time after its release in 1969, and many others. In 1989, Steyr-Daimler-Puch AG broke up into different sectors; Steyr Mannlicher AG became independent. The company has strived to be internationally oriented, so it changed its name to Steyr Arms in 2019.

Steyr Mannlicher Model M Rifle Review

Steyr Mannlicher M is a bolt-action rifle that was first introduced in 1973 and manufactured up until 1996. It was based on its predecessor, Steyr Mannlicher L but is equipped with a larger and heavier receiver for longer cartridges.

The acronyms at the end of the rifle model used by Steyr are adapted to the German language and refer to different caliber groups or action lengths. They differ from most international abbreviations:

  • SL – Super Leicht (super light)

  • L – Leicht (light)

  • M – Medium (same as in English)

  • S – Schwer (heavy)

However, the usual L, M and S acronyms of various rifle models worldwide most often refer to either the action length or a caliber group for which a certain rifle is chambered. Commonly, L stands for long, M for medium and S for short.

The B distance between the mounting holes on the receiver of Steyr Mannlicher M is 99.9 mm.

The M model features two opposing curves for a smooth operating action that houses a bolt with six rear locking lugs. The bolt throw of only 60° allows for low-scope mounting. By turning the bolt handle to a 60° position and pressing the trigger simultaneously, the bolt can be removed without effort which is especially useful for cleaning and maintenance purposes. The safety catch which is of a two-position type is located at the right end of the receiver and is easily reachable with the index finger. It blocks the firing pin and locks the bolt handle. Additionally, the rifle comes with the cocking indicator pin at the end of the bolt. The drum magazine is made of high-quality synthetic material and can hold up to five rounds. The rear wall of the magazine is transparent to see the number of cartridges left in the magazine.

Users can choose between a single or double trigger with the trigger being adjustable for pull weight by turning a small screw positioned on the top of the trigger guard. Tightening the screw increases the trigger resistance and unscrewing it decreases the pull weight. What is more, Steyr also offers a German-style hair trigger which is optional. The barrel is equipped with a tilted rear sight and a square blade front sight. A left-handed version of the rifle is available as well. The rifle comes in several versions, including Carbine, full-stock and half-stock versions.

Steyr Mannlicher M, chambered for 7x64 Figure 1: Steyr Mannlicher M, chambered for 7x64 (Source: https://www.gunsinternational.com/guns-for-sale-online/rifles/mannlicher-schoenauer-rifles/steyr-mannlicher-model-m-7x64-factory-engraved-carved-stock-gorgeous-7x64.cfm?gun_id=101817612)

Steyr Mannlicher Model M Calibers

The M model is chambered for the following calibers:

  • 6.5x55  

  • 6.5x57

  • .270 Win.

  • 7x57

  • 7x64

  • 7.5x55 

  • .30-06 Spr.  

  • 8x57    

  • 9.3x62  

All other Steyr Mannlicher action lengths: 

There are four holes for mounting purposes on the Steyr Mannlicher M receiver, two on the front, and two on the rear mounting surface. There is no difference in height between the surfaces.

The receiver of Steyr Mannlicher M, chambered for .30-06 Spr.

Figure 2: The receiver of Steyr Mannlicher M, chambered for .30-06 Spr. (Source: https://www.gunauction.com/buy/8572121)

The moutning surface of Steyr Mannlicher Model M

A: 10 mm

B: 99.9 mm

C: 10 mm

BHU: 0 mm

Ø: M4x05

R1: R17.5

R2: R17.5

Scope Mounts Interchangeable With Steyr Mannlicher Model M

Rifles That Have One-Piece Scope Mounts Interchangeable With Steyr Mannlicher Model M

All the rifles listed in the category below have one-piece scope mounts interchangeable with Steyr Mannlicher M. For one-piece scope mounts to fit on a rifle, mounting surfaces on these rifles must match in every dimension. Rifles that share the same dimensions and mounting surface with Steyr Mannlicher M are:

Rifles That Have Two-Piece Scope Mounts Interchangeable With Steyr Mannlicher Model M

All the rifles listed in the category below have two-piece scope mounts interchangeable with Steyr Mannlicher M. To meet interchangeability conditions, two-piece scope mounts must match in all dimensions except the B distance. B distance can vary because two-piece mounts can be installed and adjusted closer or further apart. Rifles that meet such criteria are:

Best Scope Mounts for Steyr Mannlicher Model M

Detachable Repeatable Scope Mounts for Steyr Mannlicher Model M

If you are looking for a detachable repeatable scope mount, we recommend this EAW two-piece pivot mount suitable for Steyr Mannlicher M. It is made of steel and comes with a thirty-year warranty.

Picatinny Rails for Steyr Mannlicher Model M

We recommend this steel Picatinny rail manufactured by the German company EAW. It is suitable for Steyr Mannlicher M and offers numerous scope mounting options. Additionally, the rail comes with a thirty-year warranty.

Help Us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the scope mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters
Sort
3 Items
Show
per page
Close
Sort By
In stock
CA$355.31
In stock
CA$377.42
In stock
CA$377.42
Filters
Sort
3 Items
Show
per page
Close
Sort By

The 30mm tube on these devices is used as a means of mounting when attaching them to a firearm. Typically, the mounting area is divided by the turret section, just like in conventional riflescopes.

The 30mm tube mounting standard on Pulsar Thermion 2 XP50 Pro

The 30mm tube mounting standard on Pulsar Thermion 2 XP50 Pro

To attach these thermal scopes to a rifle, 30mm rings are required.

Thermal riflescopes that share this mounting standard

ATN ThOR 4 384 1-25-5x*

ATN ThOR 4 384 2-8x*

ATN ThOR 4 384 4.5-18x*  
ATN ThOR 4 384 7-28x*

ATN ThOR 4 640 1-10x*

ATN ThOR 4 640 1.5-15x*

ATN ThOR 4 640 2.5-25x*

ATN ThOR 4 640 4-40x*

ATN ThOR LT 160 3-6x*

ATN ThOR LT 160 4-8x*

ATN ThOR LT 160 5-10x*  
ATN ThOR LT 320 2-4x*

ATN ThOR LT 320 3-6x*

ATN ThOR LT 320 4-8x*

ATN ThOR LT 320 5-10x*

Conotech Night Arrow 335  
Conotech Night Arrow 350  
Conotech Night Arrow 635  
Conotech Night Arrow 650  
Guide TU420

Guide TU430

Guide TU450

Guide TU620

Guide TU630

Guide TU650

Hikmicro Stellar Pro SQ35  
Hikmicro Stellar Pro SQ50  
Hikmicro Stellar SH35

Hikmicro Stellar SH50

Hikmicro Stellar SQ35

Hikmicro Stellar SQ50

Infiray Tube TH35  
Infiray Tube TH35 V2

Infiray Tube TH50

Infiray Tube TL35  
Infiray Tube TL35 V2  
Infiray Tube TL50  
Lahoux Sight 25  
Lahoux Sight 35  
Lahoux Sight Elite 25  
Lahoux Sight Elite 50  
Liemke Sperber 1  
Night Pearl Marten 420  
Night Pearl Marten 430  
Night Pearl Marten 450  
Night Pearl Marten 620  
Night Pearl Marten 630  
Night Pearl Marten 650  
Pulsar Thermion 2 LRF XG50

Pulsar Thermion 2 LRF XP50 Pro

Pulsar Thermion 2 LRF XQ50 Pro

Pulsar Thermion 2 XP50 Pro

Pulsar Thermion 2 XQ35 Pro

Pulsar Thermion 2 XQ50 Pro

Pulsar Thermion Duo DXP50

Pulsar Thermion Duo DXP55

Pulsar Thermion XM30  
Pulsar Thermion XM38  
Pulsar Thermion XM50  
Pulsar Thermion XP38  
Pulsar Thermion XP50  
Pulsar Thermion XQ38  
Pulsar Thermion XQ50  
Thermtec Ares335  
Thermtec Ares360  
Thermtec Ares660  


*named Mars instead of ThOR in the EU.

Night vision riflescopes that feature the tube mounting standard

ATN X-Sight 4K INT 3-14x  
ATN X-Sight 4K INT 5-20x  
ATN X-Sight 4K Pro 3-14x

ATN X-Sight 4K Pro 5-20x

ATN X-Sight LTV 3-9x

ATN X-Sight LTV 5-15x

Guide DU50  
Hikmicro Alpex A50T

Hikmicro Alpex A50TN

Infiray
 Tube TD50L

Pard DS35

Pulsar Digex C50

Pulsar Digex N450  
Pulsar Digex N455  
Yukon Photon RT 4.5x42S  
Yukon Photon XT 6.5x50S