Anschutz 1574

The History of Anschutz

On the first of July in 1856, the son of the master gunsmith Johann Heinrich Gottlieb Anschütz, Julius Gottfried Anschütz founded the company J.G. ANSCHÜTZ in Zella-Mehlis, Thuringia. Forty years later, they relocated from the small workshop to their first factory with 76 employees. The founder of the J.G. ANSCHÜTZ company passed away in 1901. His sons Fritz and Otto took over their father's work. The latter died in 1923. The company was continued by Fritz August Anschütz supported by his two sons Max Fritz and Rudolf Charles Anschütz, the third ANSCHÜTZ generation. The factory was closed down and then destroyed and seized after the war.

1950 was the year of a fresh start in the Danube Bastion in Ulm where the company J.G. ANSCHÜTZ GmbH was founded. 7 people and 20 machines initially handled air pistols and gun repairs; afterward, Flobert rifles (rimfire rifles) and Match rifles were added. After the first sport shooting success, further successes came one after the other. Max Schmeling, a former boxing champion, also competed for Germany on the clay pigeon shooting national team. He was familiar with ANSCHÜTZ rifles because he was a target shooter and a hunter. He purchased some of them in Ulm and even suggested a change in the company's logo.

Dieter Anschütz, a member of the fourth generation, took over management in 1968 and proved himself as a good leader. The catchphrase "DIE MEISTER MACHER" was born out of the achievements of the ANSCHÜTZ target actions across the globe. It still holds true today. As managing director since 1992, Jochen Anschütz continues to administer the company with the aid of his son.

Anschutz 1574 Rifle Review

Anschutz 1574 is a bolt-action rifle made for a variety of short-action calibers. It is basically a mix of the Krico Model 600's action and Anschutz's stock.

The bolt has two locking lugs that lock into the receiver. It can be easily taken down without using any tools due to its simplistic design. While the rifle was being produced, customers were given a choice of either a conventional single trigger or the newer double trigger system. The double trigger system uses the rear trigger as the set trigger, meaning it majorly decreases the pull weight of the front trigger, which is then used to fire the rifle.

Anschutz 1574 receiver comes with four pre-tapped holes for mounting purposes, two in the front and two in the rear mounting surface.

Anschutz 1574, chambered for .223 Rem.

Figure 1: Anschutz 1574, chambered for .223 Rem. (Source: https://www.proxibid.com/Anschutz-1574-223-Rifle/lotInformation/58481513)

Anschutz 1574 Calibers

Anschutz 1574 is chambered for the following calibers:

.17 Rem.
.222 Rem.
.223 Rem.
.22-250 Rem.
5.6x50 Mag.
5.6x57
.222 Rem. Mag.
.243 Win.
6.5x55
.270 Win.
.308 Win.

Anschutz 1574 receiver, chambered for .308 Win.

Figure 2: Anschutz 1574 receiver, chambered for .308 Win. (Source: https://www.gunsinternational.com/guns-for-sale-online/rifles/anschutz-rifles/rare-anschutz-1574--308-bolt-action-rifle.cfm?gun_id=101129631)

Krico Model 600

A: 21.9 mm

B: 82.5 mm

C: 12.7 mm

BHU: 1.5 mm

Ø: M3,5

R1: R15.0

R2: R16.5

Scope Mounts Interchangeable With Anschutz 1574

Rifles That Have One-Piece Scope Mounts Interchangeable With Anschutz 1574

For one-piece mounts to fit on a rifle, the mounting surfaces of these rifles must match in all dimensions.

Krico Model 600

Rifles That Have Two-Piece Mounts Interchangeable With Anschutz 1574

For two-piece mounts to fit on a rifle, mounting surfaces must match in all dimensions except the B distance. B distance can vary because two-piece mounts can be installed and adjusted closer or further apart. The following rifles are interchangeable:

Best Scope Mounts for Anschutz 1574

Fixed Scope Mounts for Anschutz 1574:

We recommend these MAKfix Rings with Bases made by the German Manufacturer, MAK. They are made of steel and come with a thirty-year warranty.

Repeatable Detachable Scope Mounts for Anschutz 1574:

MAK’s steel pivot mount from the MAKlassic series offers everything a mount has to offer. It provides a very quick, easy way of changing the scope and comes with a thirty-year warranty.

Picatinny Rails for Anschutz 1574:

If you wish to install a Picatinny rail on your rifle, we suggest this aluminum one from INNOMOUNT. It comes with a ten-year warranty.

Help Us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters

Sort

In stock

EAW Steel Picatinny rail, Krico 700

€98.00

Add to compare

In stock

INNOmount Picatinny rail for Krico 600

€82.00

Add to compare

In stock

ERAMATIC Swing (Pivot) mount, Picatinny Rail

As low as €319.00

View Product

Add to compare

In stock

INNOmount Multirail - Blaser for Krico 600

€139.00

Add to compare

Filters

Sort

VIDEO

Introduction

In recent years we can observe that a trend of Picatinny rail has become widespread and global. It is driven by the NATO standardized rails, more commonly known as the Picatinny rail standard. Picatinny rail being the New Jersey Arsenal that developed it in 1995.

These mounting options are revolutionary. The biggest and best advantage being that the Picatinny rail can be used its entire length and not bordered to a few pre-designed slots like for example the Weaver rail standard was before.

The other main advantage is the ease of use and interchangeability. If a product is meant for a Picatinny rail design it will fit all Picatinny-rails, no matter the manufacturer or date of production.

Picatinny/Weaver Rail

Picatinny Rail and Weaver rail profile

Design

The Picatinny rail is almost exclusively crafted from a single piece of metal (in some cases aluminum). In this manner, the axis of the Picatinny rail is perfectly straight and aligned with the axis of the firearm. Therefore the rifle scope which is mounted onto this kind of configuration is certainly aligned with the rifle / gun and the trajectory of the ammunition.

Weaver rail design on the other hand is usually manufactured in two separate pieces, greatly increasing the possibilities for the axis to be crooked, overlapping, and out of line.

It is always harder to align two separate pieces to a third line than it is to align one piece to another. In this way, the lapping of two mounting rings on a single-piece Picatinny rail is no longer required.

The single-piece rail will assure that both rings are perfectly aligned to each other and that no unwished stress is transferred to the riflescope.

Picatinny compare to Weaver Rail

The Picatinny rail itself is an evolutionary step forward from the older Weaver rail. The main difference between Picatinny rail and Weaver rail is the spacing of the slots. Picatinny rail design has them evenly placed exactly 5.23 mm from one slot to the other, 3 mm deep. For this reason, the mounting options are repeatable and the same as other firearms using the Picatinny rail standard.

Interchangeability was a major driving force in the development of the new standard as different NATO armies need to be compatible with each other.

Weaver rail has 3.8mm wide slots and these slots can be placed anywhere on the Weaver rail and in any number that the producer wished.

Advantages of Picatinny design

A big advantage for using the Picatinny rail design is the ever-present recoil stop. Furthermore, the manufacturing of the rail is not very technically demanding and can be done without the use of state-of-the-art machines which greatly reduces the cost of the finished product, making it very affordable.

The Picatinny rail is easy to mount and usually, this type of configuration does not transfer negative stresses and forces from the fired weapon to the rifle scope.

In addition, the Picatinny rail with its very long useable surface works well for mounting longer rifle scopes or to achieve optimum eye relief.

The durability and toughness are other big pluses for this solution.

Manufacturers of Popular Models

A majority of the Picatinny rings are fixed, but a number of best rated European manufacturers (EAW, MAK,..) have, in recent years, put a lot of effort into the development of detachable ring with100% repeatability, with which it becomes easy to remove the scope from the weapon without the use of tools.

No re-zeroing is needed with such mount options, but these models tend to be expensive.

Weaver and Picatinny Rings

Picatinny rail and weaver rail share one more thing. It is possible to use the Weaver ring and the Picatinny ring on the Picatinny-rails, but it is usually impossible to use the Picatinny ring on the Weaver base. The reason being the above-mentioned positioning and spacing of the slots.

Picatinny mounts have a 5mm recoil stop that goes into the rail slot and since
Weaver rail only has 3.8mm wide slots such rings do not fit on Weaver rails.

Due to this reason, the Picatinny-rails are popular and prevailing on the market in recent years and eventually, these options will completely oust the Weaver rail from the market.

Anschutz 1574

The History of Anschutz