BRNO ZKK 601

Sub Categories

Repeatable Mounts

Pivot Mounts

The History of Brno

The history of the Brno company or Czechoslovak Armory (Československá zbrojovka) as it was known prior to WWI, began in the city of Brno in the Czech Republic, formerly known as Czechoslovakia. In 1918, the Brno Rifles factory was established. Before 1918, Brno Plant was an arsenal located in the Austro-Hungarian Empire. Brno started producing Mauser 98 rifles in 1920 after buying excess weapons and equipment from Mauser-Oberndorf. These Brno-produced Mausers had a 98/22 designation stamped onto the receivers marking the year of production.

In the period between WWI and WWII, Brno collaborated with the Royal Small Arms Factory in Enfield, England to develop a well-known Bren light machine gun. They produced weapons for the Czechoslovakian and German armies during World War II. After the war, the company was nationalized by the Czechoslovakian government and renamed Zbrojovka Brno. While it was under socialist control until 1989, it switched to the production of sporting weapons which quickly gained a reputation for their reliability. For some time, the company also produced light artillery and several other products such as tractors, typewriters, and early computers.

During the years they presented numerous models of weaponry such as the ZB vz. 26 light machine gun, ZB-50 heavy machine gun, the MG34, several bolt action rifles, ZKM and ZH series, ZKR 551 handgun etc.

The company was privatized in 1990, just three years before Czechoslovakia split into the Czech Republic and Slovakia. Zbrojovka Brno was acquired by Česká zbrojovka (CZ) in 2008. With the new ownership, they agreed to a longer lease, which allows the business to continue production in rented facilities. They still make high-end products for hunting and competition, including pistols, single-shot and double rifles, combination rifles, as well as over/under shotguns.

Brno ZKK 601 Rifle Review

Brno ZKK is a series of Czech bolt-action rifles designed and introduced in the early 1960s as a replacement for the vz. 52 rifles. There are three models available in the series, namely ZKK 600, ZKK 601 and ZKK 602, each with a different action length and chambered for a different caliber group. The three models also have somewhat differently shaped stocks; however, apart from those differences, they are structurally the same.

Brno ZKK 601 is the short-action version of the three models. The rifle comes with a Mauser-style breech system with a long claw extractor and an internal box magazine that can hold up to five cartridges. The controlled-feed action system is made of high-grade steel and features a bolt with three locking lugs: two larger, main lugs at the bolt head and a third, smaller safety lug underneath the bolt handle which acts as a backup, providing further safety when the bolt locks into the receiver. There is a two-position safety lever located at the rear right side of the receiver behind the bolt handle which locks the trigger mechanism and blocks the bolt in a closed position at the same time. Additionally, the protrusion on the rear part of the striker from the bolt shroud also indicates when the rifle is cocked, and the striker is activated. Both standard and single-set triggers are available. Users can manually adjust the weight of the trigger pull by turning the screw accessible through the upper side of the receiver when the bolt is removed.

The front sight is mounted on the ramp and secured in place by a spring-loaded catch allowing for easy and fast removal. The rear sight which is adjustable for windage is attached to the dovetail and secured by indentation. Brno ZKK 601 comes with 19 mm milled dovetail grooves at the top of the receiver which are suitable for installing scope mounts.

Brno ZKK 601

Figure 1: Brno ZKK 601, chambered for .222 Rem. (Source: https://www.dorleac-dorleac.com/arme/zkk-601-222-remington/?lang=en)

Brno ZKK 601 Calibers

The rifle is chambered for the following calibers:

.222 Rem.
.243 Win.
.308 Win.

Brno ZKK 601 comes with milled 19 mm dovetail grooves at the top of the receiver which are suitable for installing scope mounts. The recoil notch is positioned on the left side of the rear mounting surface.

The receiver of Brno ZKK 601

Figure 2: The receiver of Brno ZKK 601, chambered for .222 Rem. (Source: https://www.dorleac-dorleac.com/arme/zkk-601-222-remington/?lang=en)

The mounting surface of Brno ZKK 601

A: /

B: /

C: /

D: 19 mm

BHU: 0 mm

Ø: /

R1: Prisma 19

R2: Prisma 19

Scope Mounts Interchangeable With Brno ZKK 601

Rifles That Have One-Piece Scope Mounts Interchangeable With Brno ZKK 601

For one-piece mounts to fit on a rifle, mounting surfaces on these rifles must match in every dimension. Rifles that have one-piece mounts interchangeable with Brno ZKK 601 are the following:

Brno CZ 537

Brno ZKK 600

Rifles That Have Two-Piece Scope Mounts Interchangeable With Brno ZKK 601

For two-piece mounts to be interchangeable, the mounting surfaces of the rifle must match in every dimension except the action length which can vary. This is because of the distance between the two pieces of the mount which is not fixed. If the Scope mount comes with a recoil stopper that cannot be removed, it must match the position of the notch on the receiver. Rifles that have two-piece mounts interchangeable with Brno ZKK 601 are the following:

Best Scope Mounts for Brno ZKK 601

Fixed Scope Mounts for Brno ZKK 601

We recommend these scope rings with bases are manufactured by the German company MAK. They are made of high-quality steel and come with a thirty-year warranty.

Detachable Repeatable Scope Mounts for Brno ZKK 601

Detachable scope mounts are quickly and easily installed on the rifle which is especially useful for maintenance purposes. This two-piece repeatable pivot mount made by the German company EAW is a suitable choice for your Brno ZKK 601.

Picatinny Rails for Brno ZKK 601

If you are considering converting your 19 mm dovetail to Picatinny, this mounting solution might suit your needs. The Rusan Picatinny rail is made in Croatia and comes with a ten-year warranty.

Help Us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the scope mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Compatibility Above

Filters

Sort

In stock

EAW Adapter for dovetail with adjustable lever, Aimpoint Micro

As low as NOK 974.54

View Product

BRNO ZKK 601

Sub Categories

The History of Brno

Brno ZKK 601 Rifle Review

Brno ZKK 601 Calibers

Scope Mounts Interchangeable With Brno ZKK 601

Rifles That Have One-Piece Scope Mounts Interchangeable With Brno ZKK 601

Rifles That Have Two-Piece Scope Mounts Interchangeable With Brno ZKK 601

Best Scope Mounts for Brno ZKK 601

Fixed Scope Mounts for Brno ZKK 601

Detachable Repeatable Scope Mounts for Brno ZKK 601

Picatinny Rails for Brno ZKK 601

Help Us Build Our Riflescope Mounts Database

VIDEO

FIXED vs DETACHABLE scope mounts

DETACHABLE vs REPEATABLE scope mounts

TIP OFF / ROLL OFF vs SLIDE ON mounts

Leave us a message

Your wishlist