Sauer 200 Lang

About the Sauer

The story of Sauer & Sohn company began way back in the year 1751. The company was founded by Lorenz Sauer in the German city Suhl and until today it still lives up to its reputation as the oldest firearms manufacturing company in Germany. At its very beginnings, the company predominantly focused on producing firearms based on military contracts. The ‘Seven Years War’ in 1753 resulted in the company's first larger orders for the Prussian army.

Almost ninety years later, the eponymous grandson of Johann Paul Sauer started his business unit and around the same time, in 1839, the company changed its name to Spangenberg & Sauer. After the death of co-owner Ferdinand Spangenberg in 1873, Johann Paul Sauer, together with his sons Rudolf and Franz, took over the majority ownership of the company and re-named it to ‘J.P. Sauer & Sohn’. Soon after, the company reached its highest order to that point - approximately 150.000 rifles were produced for the German army. However, the number of military orders decreased severely in the following years, thus forcing the company to find new ways of expanding its market.

As the middle class grew, the demand for civilian arms production increased. The company knew how to exploit this economic situation and consequently presented its first SBS rifle in 1881, followed by the first catalogue which was released one year later. The innovativeness did not stop there – the company's success was at its very beginning, to say the least. As it grew, it began to gradually focus on hunting rifles. Thereupon, the first Sauer self-cocking drilling with a separate cocking lever for the ball lock was presented and launched in 1895. Twenty years later, the company presented the Sauer Meisterwerk XVIII shotgun that boasted sear, single trigger, ejector and engraving by Franz Schilling.

During the First World War, they mostly re-focused on military production and expanded its establishment along with the number of staff. However, the social and economic penury after the war, made the company struggle in the following years. To ensure its survival, the company started producing various products such as typewriters under the name Fortuna; for a short period, they also manufactured bikes. Due to the prohibition of military production, the construction of light hunting rifles was launched in 1930 with the triplet Mod. 30 and Mod. 30 L being introduced the same year and Mod. 32, Mod 32 L, Mod. 33 shortly after.

The shift in production happened again at the beginning of the Second World War when orders for military purposes firearms were increased. After the War, being deleted from the commercial register and under total soviet occupation, the company continued its production under different names - 'VEB FORTUNA Werk Suhl' and later 'VEB MEWA Ernst-Thälmann-Werke Suhl'. At that point, Rolf Sauer sold all company's rights to a group of industrialists in FRG. Nonetheless, the company still used its original name J.P. Sauer & Sohn for the production of hunting rifles years later. In 1951 J.P Sauer & Sohn GmbH was founded as the first hunting rifles manufacturer in FRG.

Soon after some of the most recognizable models were presented, such as Drilling Model 3000, which replaced the famous S53 Drilling, Model 80 bolt action rifle, Sauer 200 (the first modular action rifle in 14 calibres), the S 200 and Sauer 202.

After the year 2000, the ownership changed again when passionate hunters Michael Lüke and Thomas Ortmeier took over. At that turning point, the company shifted to focusing exclusively on the production of hunting rifles, presenting several popular models such as SAUER 303 self-loading rifle, SAUER 101, SAUER 202, SAUER 404, SAUER 404 Synchro XTC, SAUER 100, Sauer S 100, SAUER SL5 and SAUER101 Highland XTC. Nowadays, the brand's vivacious history and tradition of over 270 years result in quality and experience, thus offering an infallible choice for every hunting enthusiast.

Sauer 200 (Lang) Rifle Review

Sauer 200 Lang is a two-piece stock, German-produced bolt action rifle and one of the first of its kind to offer a switch-barrel feature. It is a predecessor to Sauer 202. Contrary to the S 200 Kurz variant the steel or aluminium alloy receiver is 6 cm longer and appropriate for chambering larger calibres. It houses a push feed bolt with six-locking lugs which is renowned for its smoothness. The lugs lock up directly with the barrel instead of the receiver. Switching the barrel and converting it to a different calibre is made possible by the rifle's modular design.

Contrary to S 202, this version’s safety operation consists of a vertically mounted slide which can be found within the trigger guard. The rifle comes with a detachable vertical stack magazine. It was produced between the years 1984 and 1993.

Possible barrel lengths for S 200 Lang are 510 mm (20-inch), 560 mm (22-inch) and 600 mm (22.6-inch).

Sauer 200 Lang

Figure 1: Sauer 200, chambered for .243 Win.

Sauer 200 Lang can be chambered for the following calibres:

.25-06 Rem.
6.5x55 SE
6.5x57
.270 Win.
6.5x68
7x64
.30-06 Spr.
8x68 S
9.3x62

All S 200 Lang receivers come with four holes for mounting purposes, two on the front and two on the rear mounting surface.

Sauer 200 Lang

Figure 2: The receiver of Sauer 200, chambered for .30-06 Spr.

Sauer 200 Lang

A: 21.9 mm

B: 100.2 mm

C: 21.9 mm

BHU: 0 mm

Ø: 6-48

R1: R17.4

R2: R17.4

Which Rifles Have Interchangeable Mounts

Two-piece mounts

All the rifles listed in the category below have two-piece mounts interchangeable with Sauer 200. To meet interchangeability conditions, two-piece mounts must match in all dimensions except the B distance. B distance can vary because two-piece mounts can be installed and adjusted closer or further apart. Rifles that meet such criteria are:

Carl Gustaf 4000
Sauer 200 Kurz

One-piece mounts

For one-piece mounts to fit on a rifle, mounting surfaces on these rifles must match in every dimension. The rifle that shares the same dimensions and mounting surface as Sauer 200 Lang is:

Carl Gustaf 4000

Our Recommendations for Mounts

If you are looking for a reliable fixed mounting solution to fit on your Sauer 200 Lang, we highly recommend purchasing this two-piece mount manufactured by the German company MAK. The mount is made of durable steel which adds to the mount’s recoil resistance.

Detachable Repeatable Mounts

Easy to install and fully repeatable, ERAMATIC one-piece mount is one of the most suitable swing mount solutions for your Sauer 200. It is manufactured by the German company Recknagel and made of light alloy material.

Picatinny Rails

This steel Picatinny rail manufactured by the German company EAW is suitable for Sauer 200 Lang variant. Being one of the most versatile mounting solutions on the market, it will provide the user with numerous mounting possibilities.

Help us build our riflescope mounts database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: info@optics-trade.eu

Filters

Sort

In stock

ERA-TAC picatinny rail - Savage rounded top, short (model 10)

£74.54

Sauer 200 Lang

About the Sauer

Sauer 200 (Lang) Rifle Review

Which Rifles Have Interchangeable Mounts

Two-piece mounts

One-piece mounts

Our Recommendations for Mounts

Detachable Repeatable Mounts

Picatinny Rails

Help us build our riflescope mounts database

VIDEO

Introduction

Design

Picatinny compare to Weaver Rail

Advantages of Picatinny design

Manufacturers of Popular Models

Weaver and Picatinny Rings

Leave us a message

Your wishlist